Command Manual – HA
H3C S7500E Series Ethernet Switches
Chapter 2 HA Configuration Commands
2-3
Description
Use the
slave
auto-update
config
command to enable automatic synchronization of
the configuration file on the AMB and SMB.
Use the
undo slave
auto-update
config
command to disable automatic
synchronization of the configuration file on the AMB and SMB.
By default, automatic synchronization of the configuration file on the AMB and SMB is
enabled.
Examples
# Enable automatic synchronization of the configuration file on the AMB and SMB.
<Sysname> system-view
[Sysname] slave auto-update config
2.1.4 slave restart
Syntax
slave
restart
View
System view
Parameters
None
Description
Use the
slave
restart
command to manually configure the SMB to restart.
When the backup system program operates abnormally and needs to be reloaded, you
can manually restart the SMB.
Examples
# Restart the SMB.
<Sysname> system-view
[Sysname] slave restart
The slave will reset! Continue?[Y/N]:y
2.1.5 slave switchover
Syntax
slave
switchover