Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Chapter 1 Routing Overview Commands
1-15
Static Routing table Status : < Inactive>
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
1.2.3.0/24 Static 60 0 1.2.4.5 Vlan10
For detailed description of the above output, see
Table 1-4
.
1.1.8 display ip routing-table statistics
Syntax
display ip routing-table
statistics
View
Any view
Parameters
None
Description
Use the
display ip routing-table statistics
command to display statistics about the
public network routing table.
Examples
# Display statistics about the routes in the routing table.
<Sysname> display ip routing-table statistics
Proto route active added deleted freed
DIRECT 24 4 25 1 0
STATIC 4 1 4 0 0
RIP 0 0 0 0 0
OSPF 0 0 0 0 0
IS-IS 0 0 0 0 0
BGP 0 0 0 0 0
Total 28 5 29 1 0
Table 1-6
Description on the fields of display ip routing-table statistics
Field
Description
Proto
Origin of the routes. Possible values include O_ASE for OSPF_ASE
routes, O_NSSA for OSPF NSSA, and AGGRE for aggregated routes.
route
Number of routes from the origin
active
Number of active routes from the origin
added
Number of routes added into the routing table since the router starts up
or the last routing table reset operation
