Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
3-1
Chapter 3 OSPF Configuration Commands
3.1 OSPF Configuration Commands
Note:
The term “router” in this document refers to a router in a generic sense or a Layer 3
switch running routing protocols.
3.1.1 abr-summary
Syntax
abr-summary
ip-address
{
mask
|
mask-length
} [
advertise
|
not-advertise
] [
cost
cost
]
undo
abr-summary
ip-address
{
mask
|
mask-length
}
View
OSPF area view
Parameters
ip-address
: Destination IP address of the summary route, in dotted decimal format.
mask
: Mask of the IP address in dotted decimal format.
mask-length
: Mask length, in the range 0 to 32 bits.
advertise
|
not-advertise
: Advertises the summary route or not. By default, the
summary route is advertised.
cost
cost
: Specifies the cost of the summary route, in the range 1 to 16777215. The
default cost is the largest cost value among routes that are summarized.
Description
Use the
abr-summary
command to configure a summary route on the area border
router.
Use the
undo abr-summary
command to remove a summary route.
By default, no route summarization is configured on an ABR.
You can enable advertising the summary route or not, and specify a route cost.
