Command Manual – NTP
H3C S7500E Series Ethernet Switches
Chapter 1 NTP Configuration Commands
1-4
Table 1-2
Description on the fields of the
display
ntp-service status
command
Field
Description
Clock status
Status of the system clock
Clock stratum
Stratum level of the local clock
Reference clock ID
After the system clock is synchronized to a remote time
server or a local reference source, this field indicates the
address of the remote time server or the identifier of the
local clock source respectively:
z
When the local clock has a stratum level of 1, the value
of this field is “LOCL”;
z
When the stratum of the local clock has another value,
the value of this filed is the IP address of the local
clock.
Nominal frequency
The nominal frequency of the local system hardware clock
Actual frequency
The actual frequency of the local system hardware clock
Clock precision
The precision of the system clock
Clock offset
The offset of the system clock relative to the reference
source
Root delay
The roundtrip delay from the local device to the primary
reference source
Root dispersion
The maximum error of the system clock relative to the
primary reference source
Peer dispersion
The maximum error of the system clock relative to the
reference source
Reference time
Reference timestamp
1.1.3 display ntp-service trace
Syntax
display ntp-service trace
View
Any view
Parameters
None
