Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 6 Routing Policy Configuration Commands
6-25
6.2.3 if-match acl
Syntax
if-match
acl acl-number
undo if-match
acl
View
Routing policy view
Parameters
acl-number
: ACL number from 2000 to 3999.
Description
Use the
if-match
acl
command to configure an ACL match criterion.
Use the
undo if-match acl
command to remove the match criterion.
No ACL match criterion is configured by default.
Related commands:
if-match interface
,
if-match ip next-hop
,
if-match cost
,
if-match tag
,
route-policy
,
apply ip-address next-hop
,
apply cost
,
apply
local-preference
,
apply origin
,
apply tag
.
Examples
# Create routing policy
policy1
with node 10, matching mode as permit. Define an
if-match clause to permit routes matching ACL 2000.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match acl 2000
6.2.4 if-match ip
Syntax
if-match ip
{
next-hop
|
route-source
} {
ac
l
acl-number
|
ip-prefix
ip-prefix-name
}
undo if-match ip
{
next-hop
|
route-source
}
[
acl
|
ip-prefix
]
View
Routing policy view
Parameters
next-hop
: Matches next hop.
route-source
: Matches source address.
acl acl-number
: Matches an ACL with a number from 2000 to 2999.
