Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
3-30
Field
Description
Total Nets
Total networks
Intra Area
Total intra-area routes
Inter Area
Total inter-area routes
ASE Total
ASE
routes
NSSA
Total NSSA routes
3.1.23 display ospf vlink
Syntax
display ospf
[
process-id
]
vlink
View
Any view
Parameters
process-id
: OSPF process ID, in the range 1 to 65535.
Description
Use the
display ospf vlink
command to display OSPF virtual link information.
If no OSPF process is specified, the OSPF virtual link information of all OSPF
processes is displayed.
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (Vlan-interface1)
Cost: 1 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1