Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Chapter 1 Routing Overview Commands
1-19
Parameters
acl6-number:
Basic IPv6 ACL number, in the range 2000 to 2999.
verbose
: Displays both active and inactive verbose routing information permitted by
the ACL. Without this keyword, only brief active routing information is displayed.
Description
Use the
display ipv6 routing-table acl
command to display routing information
permitted by the IPv6 ACL.
If the specified IPv6 ACL is not available, all routing information is displayed.
Examples
# Display brief routing information permitted by ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list 2000 :
Summary Count : 2
Destination : ::1/128 Protocol : Direct
NextHop : ::1 Preference : 0
Interface : InLoop0 Cost : 0
Destination : 1:1::/64 Protocol : Static
NextHop : :: Preference : 60
Interface : NULL0 Cost : 0
Refer to
Table 1-9
for description about the above output.
1.1.13 display ipv6 routing-table ipv6-address
Syntax
display ipv6 routing-table
ipv6-address
prefix-length
[
longer-match
] [
verbose
]
View
Any view
Parameters
ipv6-address
: Destination IPv6 address.
prefix-length
: Prefix length, in the range 0 to 128.
longer-match
: Displays the matched route having the longest prefix length.
verbose
: Displays both active and inactive verbose routing information. Without this
keyword, only brief active routing information is displayed.