Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 IPv6 OSPFv3 Configuration Commands
3-24
Table 3-18
Description on the fields of the
display ospfv3 vlink
command
Field
Description
Virtual Link VLINK1 to router 1.1.1.1 is
up
The virtual link VLINK1 to router 1.1.1.1
is up
Transit area 0.0.0.1 via interface
Vlan-interface100
Interface VLAN-interface 100 in transit
area 0.0.0.1.
instance ID
Instance ID
Local address
Local IPv6 address
Remote address
Remote IPv6 address
Transmit Delay
Transmit delay of sending LSAs
State Interface
state
Timer intervals configured, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Timer intervals in seconds, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Send hello packets in 2 seconds.
Adjacency state
Adjacency state
3.1.18 filter-policy export
Syntax
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
export
[
isisv6 process-id
|
ospfv3 process-id
|
ripng process-id
|
bgp4+
|
direct
|
static
]
undo filter-policy export
[
isisv6 process-id
|
ospfv3 process-id
|
ripng process-id
|
bgp4+
|
direct
|
static
]
View
OSPFv3 view
Parameters
acl6-number
: Specifies the ACL6 number, ranging from 2000 to 3999.
ipv6-prefix
ipv6-prefix-name
: Specifies the name of an IPv6 prefix list, a string of up to
19 characters.
isisv6 process-id
: Specifies to filter the routes of an IPv6-IS-IS process, which is in the
range of 1 to 65535.
ospfv3 process-id
: Specifies to filter the routes of an OSPFv3 process, which is in the
range of 1 to 65535.
ripng process-id
: Specifies to filter the routes of a RIPng process, which in the range of
1 to 65535.
