Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
3-35
Description
Use the
host-advertise
command to advertise a host route.
Use the
undo host-advertise
command to remove a host route.
No host route is advertised by default.
Examples
# Advertise the host route 1.1.1.1 with a cost of 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] host-advertise 1.1.1.1 100
3.1.29 import-route
Syntax
import-route
protocol
[
process-id
|
allow-ibgp
] [
cost
cost
|
type
type
|
tag tag
|
route-policy route-policy-name
]*
undo import-route
protocol
[
process-id
]
View
OSPF view
Parameters
protocol
: Redistributes routes from the protocol, which can be
direct
,
static
,
rip
,
ospf
,
isis
or
bgp
.
process-id
: Process ID, which is optional when the
protocol
is
rip
,
ospf
or
isis
, in the
range 1 to 65535.
allow-ibgp
: Allows IBGP routes redistribution. It is optional only when the
protocol
is
bgp
.
cost cost
: Specifies a route cost, in the range 0 to 16777214. The default is 1.
type
type
: Specifies a cost type, 1 or 2. The default is 2.
tag
tag
: Specifies a tag for external LSAs. The default is 1.
route-policy route-policy-name
: Specifies a route policy to redistribute qualified routes
only. A Route policy name is a string of up to 19 characters.
Description
Use the
import-route
command to redistribute routes from another protocol.
Use the
undo import-route
command to disable route redistribution from a protocol.
Route redistribution from another protocol is not configured by default.
