PTX10002-60C Quick Start Guide
PTX10002-60C Packet Transport Router Overview
The PTX10002-60C Packet Transport Router is a second-generation PTX Series fixed-configuration core router, featuring a
compact, 2 U form factor that is easy to deploy in space-constrained Internet exchange locations, remote central offices, and
embedded peering points throughout the network, including cloud-hosted services. The PTX10002-60C operates at 6 Tbps in
a fixed core router configuration. It supports flexible interface configuration options, offering 60 physical 100-Gigabit Ethernet
ports that support the quad small form-factor pluggable transceiver QSFP28.
For more information about the PTX10002-60C hardware, see the
PTX10002-60C Packet Transport Router Hardware Guide
available at:
https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/ptx-series/index.html
Register the Product
Register product serial numbers on the Juniper Networks website and update the installation base data if there is any addition
or change to the installation base or if the installation base is moved. Juniper Networks will not be held accountable for not
meeting the hardware replacement service-level agreement for products that do not have registered serial numbers or accurate
installation base data.
Register your product at
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
.
Update your installation base at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
.
PTX10002-60C Clearance Requirements for Airflow and Hardware Maintenance
When planning the site for a PTX10002-60C installation, you must allow sufficient clearance around the installed chassis. Follow
these guidelines:
•
For the cooling system to function properly, the airflow around the chassis must be unrestricted. See
PTX10002-60C Cooling
System Description and Airflow
in the
PTX10002-60C Packet Transport Router Hardware Guide
for more information about the
airflow through the chassis.
•
If you are mounting a PTX10002-60C in a rack with other equipment, ensure that the exhaust from other equipment does not
blow into the intake vents of the chassis.
•
You must leave at least 24 in. (60.9 cm) both in front of and behind the PTX10002-60C. For service personnel to remove and
install hardware components, you must leave adequate space at the front and back of the router. NEBS GR-63 recommends
that you allow at least 30 in. (76.2 cm) in front of the rack and 24 in. (60.9 cm) behind the rack. See
Figure 1
.
