background image

  

 

 
 
 
 
 
1.    If you purchased this router to share your high-speed Internet connection with 

other computers, you must have either an Ethernet-based Cable or a DSL modem 
with an established Internet account from an Internet Service Provider (ISP). 

2.    It’s best to use the same computer that is connected to your modem for 

configuring the DI-604UP router. The DI-604UP Broadband Router acts as a 
DHCP server and will assign all the necessary IP address information on your 
network. 

See Appendix at the end of this Quick Installation Guide or the 

Manual on the CD-ROM for setting each network adapter to automatically 
obtain an IP address.

 

Check Your Package Contents 

These are the items included with your DI-604UP purchase: 

 

              
 
 
 
 
 
 
 

          

 

          

  

If any of the above items are missing, please contact your reseller. 

©2007 D-Link Networks, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective 
holders. Software and specifications subject to change without notice. 

This product can be set up using any 
current web browser, i.e., Internet Explorer 
6x, Netscape Navigator 7x. 

 

• DI-604UP Broadband Router 
 
 
 
• CD-ROM  

 
 
 

• Ethernet (CAT5 UTP/Straight-Through) Cable 
 
 
 
• 5V DC, 2 A Power Adapter

 

        Using a power

         supply with a 

different voltage rating 

will damage and void 

the warranty for this 

product.

  

Before You Begin 

  

DI-604UP

Wired Router

with USB Printer Port

Summary of Contents for DI-604UP

















Reviews: