Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Chapter 3 Device Management Commands
3-17
Field
Description
Voltage(V)
Digital diagnosis parameter-voltage, in V, with
the precision to 0.01 V.
Bias(mA)
Digital diagnosis parameter-bias current, in
mA, with the precision to 0.01 mA.
RX power(dBM)
Digital diagnosis parameter-RX power, in dBM,
with the precision to 0.01 dBM.
TX power(dBM)
Digital diagnosis parameter-TX power, in dBM,
with the precision to 0.01 dBM.
3.1.15 display transceiver interface
Syntax
display transceiver interface
[
interface-type
interface-number
]
View
Any view
Parameters
interface-type interface-number:
Interface type and interface number.
Description
Use the
display transceiver interface
command to display main parameters of a
single or all transceivers.
Examples
# Display main parameters of the pluggable transceiver on interface GigabitEthernet
2/0/3.
<Sysname> display transceiver interface gigabitethernet 2/0/3
GigabitEthernet2/0/3 transceiver information:
Transceiver Type : 1000_BASE_LX_SFP
Connector Type : LC
Wavelength(nm) : 1310
Transfer Distance(km) : 10(9um)
Digital Diagnostic Monitoring : YES
Vendor Name : H3C
Ordering Name : SFP-GE-LX10-SM1310
