Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Chapter 3 OSPF Configuration Commands
3-24
Field
Description
GR State
GR state
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart,
Exchange, Loading or Full
Mode
Neighbor mode for DD exchange: master or slave
Priority Router
priority
DR
The DR on the interface’s network segment
BDR
The BDR on the interface’s network segment
MTU Interface
MTU
Dead timer due in 40 sec
Dead timer times out in 40 seconds
Neighbor is up for 00:12:59
The neighbor has been up for 00:12:59
Authentication Sequence
Authentication sequence number
Neighbor state change
count
Count of neighbor state changes
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
OSPF Process 1 with Router ID 192.168.0.138
Neighbor Brief Information
Area: 0.0.0.1
Router ID Address Pri Dead-Time Interface State
192.168.0.136 192.168.0.136 1 37 Vlan1 Full/BDR
Table 3-11
Description on the fields of the
display ospf peer
command
Field
Description
Area
Neighbor area
Router ID
Neighbor router ID
Address
Neighbor interface address
Pri Router
priority
Dead time(s)
Dead interval remained
Interface
Interface connected to the neighbor
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full