Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Chapter 1 Routing Overview Commands
1-25
Description
Use the
display ipv6 routing-table verbose
command to display detailed information
about all active and inactive routes, including the statistics of the entire routing table
and information for each route.
Examples
# Display detailed information about all active and inactive routes.
<Sysname> display ipv6 routing-table verbose
Routing Table :
Destinations : 1 Routes : 1
Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
RelayNextHop : :: Tag : 0H
Neighbour : :: ProcessID : 0
Interface : InLoopBack0 Protocol : Direct
State : Active NoAdv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 22161sec
Table 1-11
Description on the fields of the
display ipv6 routing-table verbose
command
Field
Description
Destination
Destination IPv6 address
PrefixLength Prefix
length of the address
Nexthop Next
hop
Preference Routing
preference
RelayNextHop
Relay next hop
Tag
Tag of the route
Neighbour Neighbor
address
ProcessID Process
ID
Interface Outbound
interface
Protocol Routing
protocol
State
State of the route, Active, Inactive, Adv (advertised), or
NoAdv (not advertised)
Cost
Cost of the route
Tunnel ID
Tunnel ID