Command Manual – ACL
H3C S7500E Series Ethernet Switches
Chapter 1 ACL Configuration Commands
1-5
from
time1 date1
: Indicates the start time and date of an absolute time range. The
time1
argument specifies the time of the day in
hh:mm
format as 24-hour time, where
hh
is hours and
mm
is minutes. Its value ranges from 00:00 to 23:59. The
date1
argument specifies a date in
MM/DD/YYYY
or
YYYY/MM/DD
format, where
MM
is the
month of the year in the range 1 to 12, DD is the day of the month in the range 1 to 31,
and YYYY is the year in the usual Gregorian calendar in the range 1970 to 2100. If not
specified, the start time is the earliest time available from the system, namely,
01/01/1970 00:00:00 AM.
to
time2 date2
: Indicates the end time and date of the absolute time range. The format
of the
time2
argument is the same as that of the
time1
argument, but its value ranges
from 00:00 to 24:00. The end time must be greater than the start time. If not specified,
the end time is the maximum time available from the system, namely, 12/31/2100
24:00:00 PM. The format and value range of the
date2
argument are the same as those
of the
date1
argument.
Description
Use the
time-range
command to create a time range.
Use the
undo
time-range
command to remove a time range.
A time range can be one of the following:
z
Periodic time range created using the
time-range
time-name
start-time
to
end-time
days
command. A time range thus created recurs periodically on the day
or days of the week.
z
Absolute time range created using the
time-range
time-name
{
from time1 date1
[
to time2 date2
] |
to time2 date2
} command. Unlike a periodic time range, a time
range thus created does not recur. For example, to create an absolute time range
that is active between January 1, 2004 00:00 and December 31, 2004 23:59, you
may use the
time-range test from 00:00 01/01/2004 to 23:59 12/31/2004
command.
z
Compound time range created using the
time-range
time-name
start-time
to
end-time
days
{
from time1 date1
[
to time2 date2
] |
to time2 date2
} command. A
time range thus created recurs on the day or days of the week only within the
specified period. For example, to create a time range that is active from 12:00 to
14:00 on Wednesdays between January 1, 2004 00:00 and December 31, 2004
23:59, you may use the
time-range test 12:00 to 14:00 wednesday from 00:00
01/01/2004 to 23:59 12/31/2004
command.
Note that:
z
You may create individual time ranges identified with the same name. They are
regarded as one time range whose active period is the result of ORing periodic
ones, ORing absolute ones, and ANDing periodic and absolute ones.
z
Up to 256 time ranges can be defined.
