Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
Commands
1-4
Examples
# Display brief information of port(s).
<Sysname> display brief interface
The brief information of interface(s) under route mode:
Interface Link Protocol-link Protocol type Main IP
Loop0 UP UP(spoofing) LOOP 10.1.1.1
NULL0 UP UP(spoofing) NULL --
Tun0 DOWN DOWN TUNNEL --
Vlan1 DOWN DOWN ETHERNET 2.2.2.2
Vlan2 UP UP ETHERNET 1.1.1.1
The brief information of interface(s) under bridge mode:
Interface Link Speed Duplex Link-type PVID
Eth2/0/1 DOWN auto auto access 1
Eth2/0/2 UP 100M(a) full(a) access 1
Eth2/0/3 DOWN auto auto access 1
Eth2/0/4 DOWN auto auto access 1
Eth2/0/5 DOWN auto auto access 1
Eth2/0/6 DOWN auto auto access 1
Eth2/0/7 DOWN auto auto access 1
(The remain output information is omitted.)
# Display brief port information that contains the string
UP
.
<Sysname> display brief interface | include UP
The brief information of interface(s) under route mode:
Interface Link Protocol-link Protocol type Main IP
Loop0 UP UP(spoofing) LOOP 10.1.1.1
NULL0 UP UP(spoofing) NULL --
Vlan2 UP UP ETHERNET 1.1.1.1
The brief information of interface(s) under bridge mode:
Interface Link Speed Duplex Link-type PVID
Eth2/0/2 UP 100M(a) full(a) access 1
Table 1-1
Description on the fields of the
display brief interface
command.
Field
Description
The brief information of interface(s)
under route mode
Brief information of port(s) in route mode
Interface Port
name
Link
Port physical link state, which can be up or
down
