Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Chapter 4 IPv6 IS-IS Configuration Commands
4-1
Chapter 4 IPv6 IS-IS Configuration Commands
4.1 IPv6 IS-IS Configuration Commands
Note:
z
IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6
routing information instead. This document describes only IPv6 IS-IS exclusive
commands. Refer to
IS-IS Commands
in the
part discussing IPv4 routing for other
IS-IS configuration commands.
z
At present, the LSQ1GP12EA boards in the S7500E series do not support IPv6.
4.1.1 display isis route ipv6
Syntax
display isis route ipv6
[ [
level-1
|
level-2
] |
verbose
]* [
process-id
]
View
Any view
Parameters
verbose
: Displays detailed IPv6 IS-IS routing information.
process-id
: IS-IS process ID, in the range 1 to 65535.
level-1
: Display Level-1 IPv6 IS-IS routes only.
level-2
: Displays Level-2 IPv6 IS-IS routes only.
Note:
If no level is specified, both Level-1 and Level-2 (namely Level-1-2) routing information
will be displayed.
Description
Use the
display isis route ipv6
command to display IPv6 IS-IS routing information.