Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Chapter 2 Dual Stack Configuration Commands
2-1
Chapter 2 Dual Stack Configuration Commands
2.1 Dual Stack Configuration Commands
2.1.1 ipv6
Syntax
ipv6
undo ipv6
View
System view
Parameters
None
Description
Use the
ipv6
command to enable the IPv6 packet forwarding function.
Use the
undo ipv6
command to disable the IPv6 packet forwarding function.
By default, the function is disabled.
Examples
# Enable the IPv6 packet forwarding function.
<Sysname> system-view
[Sysname] ipv6
2.1.2 ipv6 address
Syntax
ipv6 address
{
ipv6-address prefix-length
|
ipv6-address/prefix-length
}
undo ipv6 address
[
ipv6-address prefix-length
|
ipv6-address/prefix-length
]
View
Interface view
Parameters
ipv6-address
: IPv6 address for the interface.
prefix-length
: Length of the prefix in bits, in the range of 1 to 128.
