Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Chapter 4 DHCP Snooping Configuration Commands
4-6
D 10.1.1.1 000f-e200-0006 286
1
GigabitEthernet2/0/1
--- 1 dhcp-snooping item(s) found ---
Table 4-1
Description on fields of the
display dhcp snooping
command
Field
Description
Type Binding
type
IP Address
IP address assigned to the DHCP client
MAC Address
MAC address of the DHCP client
Lease
Lease period of the IP address in seconds
VLAN
VLAN where the port connecting the DHCP client resides
Interface
Port to which the DHCP client is connected
4.1.7 display dhcp-snooping trust
Syntax
display dhcp-snooping trust
View
Any view
Parameters
None
Description
Use the
display dhcp-snooping trust
command to display information about trusted
ports.
Related commands:
dhcp-snooping trust
.
Examples
# Display information about trusted ports.
<Sysname> display dhcp-snooping trust
DHCP Snooping is enabled.
DHCP Snooping trust becomes active.
Interface Trusted
========================= ============
GigabitEthernet2/0/1 Trusted
The above output shows that DHCP snooping is enabled, DHCP snooping trust is
active, and port GigabitEthernet 2/0/1 is trusted