![background image](http://html2.mh-extra.com/html/paradyne/framesaver-9120/framesaver-9120_installation-instruction-supplement_3595689001.webp)
TM
1
9000-A2-GK42-00
May 1998
FrameSaver
1-Slot Unit
Installation Instructions Supplement
Document Number 9000-A2-GK42-00
May 1998
Introduction
The FrameSaver
9120 unit that you have received has been produced
especially for applications such as yours, where the Frame Relay network
access is via the T1 Network (NET) interface, the same as in North America.
However, your unit requires the Universal power supply, rather than the
power supply used in North America. Therefore, the connection and operation
procedures listed in the
1-Slot Assembled Access Unit Installation Instructions
(Document No. 9000-A2-GN10) are accurate for your application, but the power
supply shown is different.
Safety Instructions
Please read the EMI warning and Important Safety Instructions that come with
this unit, in the
Universal Power Supply (220 Vac) Safety and Regulatory,
Warranty and Service Information (Document No. 9000-A2-GX43).
Power Cords
Refer to the following table to verify that you have the appropriate power cord for
the wall-plug standard in your country.
Country
Plug Standard
Part Number
Power Cord Description
Japan
JIS 8303
125-0092-0031
IEC 320-to-JIS 8303 – 2.5 m
Korea
NEMA 5-15P
125-0007-0031
IEC 320-to-NEMA 5-15P – 2.3 m
Installing the Universal Power Supply
Refer to
Universal Power Supply Installation Instructions (Document
No. 9000-A2-GN21).