Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches
Chapter 1 Link Aggregation Configuration Commands
1-11
Note:
You can remove an existing service loop group using the
undo link-aggregation
group
command. However, service loop groups currently referenced by modules
cannot be removed.
Examples
# Configure link aggregation group
5
as a tunnel service loop group.
<Sysname> system-view
[Sysname] link-aggregation group 5 service-type tunnel
1.1.11 port link-aggregation group
Syntax
port link-aggregation group
agg-id
undo port link-aggregation group
View
Ethernet port view
Parameters
agg-id
: Link aggregation group ID.
Description
Use the
port link-aggregation group
command to add the Ethernet port to the
specified link aggregation group (manual or static LACP) or service loop group.
Use the
undo port link-aggregation group
command to remove the Ethernet port
from the specified aggregation group or service loop group.
Related commands:
display link-aggregation verbose
.
Examples
# Add port Ethernet 2/0/1 to link aggregation group
22
.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] port link-aggregation group 22