Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Chapter 1 File System Management Commands
1-5
current-configuration
command after this command is configured successfully;
otherwise, this command may not be executed correctly.
Examples
# Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat
1.1.6 file prompt
Syntax
file prompt
{
alert
|
quiet
}
View
System view
Parameters
alert
: Enables the system to warn you about operations that may bring undesirable
results such as file corruption or data loss.
quiet
: Disables the system to warn you about any operation.
Description
Use the
file prompt
command to set a prompt mode for file operations.
By default, the prompt mode is
alert
.
Note that when the prompt mode is set to
quiet
, the system does not warn for any file
operation. To prevent undesirable consequents resulted from misoperations, the
alert
mode is preferred.
Examples
# Set the file operation prompt mode to
alert
.
<Sysname> system-view
[Sysname] file prompt alert
1.1.7 fixdisk
Syntax
fixdisk device
View
User view
