Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
Commands
1-7
Table 1-3
Description on the fields of the
display interface
command (in bridge mode)
Field
Description
Ethernet2/0/1 current state
Current physical link state of the Ethernet port
IP Packet Frame Type
Frame type of the Ethernet port
Hardware address
Hardware address
Description
Description of the port
Loopback is not set
Loopback is not configured
Unknown-speed mode
Unknown-speed mode, in which mode speed is
negotiated between the current host and the peer
unknown-duplex mode
unknown-duplex mode, in which mode speed is
negotiated between the current host and the peer
Link speed type is
autonegotiation
Link speed type is autonegotiation
link duplex type is
autonegotiation
Link duplex type is autonegotiation
Flow-control is not enabled
Flow-control is not enabled
The Maximum Frame Length
The maximum frame length allowed on a port
Broadcast MAX-ratio
Broadcast storm suppression ratio (the maximum
ratio of allowed number of broadcast packets to
overall traffic through a port)
Unicast MAX-ratio
Unicast storm suppression ratio (the maximum ratio
of allowed number of unknown unicast packets to
overall traffic through a port)
Multicast MAX-ratio
Multicast storm suppression ratio (the maximum
ratio of allowed number of multicast packets to
overall traffic through a port)
PVID
Default VLAN ID
Mdi type
Cable type
Link delay
Suppression time of physical-link-state changes on
an Ethernet Port.
Port link-type
Port link type, which could be access, trunk, and
hybrid.
Tagged VLAN ID
Identify the VLANs that need Tag markers
Untagged VLAN ID
Identify the VLANs that do not need Tag markers