Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Chapter 1 Routing Overview Commands
1-11
Use the
display ip routing-table
ip-address1
{
mask-length | mask
}
ip-address2
{
mask-length | mask
} command to display route entries with destination addresses
within a specified range.
Examples
# Display route entries for the destination IP address 11.1.1.1.
<Sysname> display ip routing-table 11.1.1.1
Routing Table : Public
Summary Count : 4
Destination/Mask Proto Pre Cost NextHop Interface
0.0.0.0/0 Static 60 0 0.0.0.0 NULL0
11.0.0.0/8 Static 60 0 0.0.0.0 NULL0
11.1.0.0/16 Static 60 0 0.0.0.0 NULL0
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
# Display route entries by specifying a destination IP address and the
longer-match
keyword.
<Sysname> display ip routing-table 11.1.1.1 longer-match
Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
# Display route entries by specifying a destination IP address and mask.
<Sysname> display ip routing-table 11.1.1.1 24
Routing Table : Public
Summary Count : 3
Destination/Mask Proto Pre Cost NextHop Interface
11.0.0.0/8 Static 60 0 0.0.0.0 NULL0
11.1.0.0/16 Static 60 0 0.0.0.0 NULL0
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
# Display route entries by specifying a destination IP address and mask and the
longer-match
keyword.
<Sysname> display ip routing-table 11.1.1.1 24 longer-match
Routing Table : Public
Summary Count : 1