Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-1
Chapter 1 802.1x Configuration Commands
1.1 802.1x Configuration Commands
1.1.1 display dot1x
Syntax
display dot1x
[
sessions
|
statistics
] [
interface interface-list
]
View
Any view
Parameters
sessions
: Displays 802.1x session information.
statistics
: Displays 802.1x statistics.
interface interface-list
: Specifies an Ethernet port list, which can contain multiple
Ethernet ports. The
interface-list
argument is in the format of
interface-list
=
{
interface-type
interface-number
[
to
interface-type
interface-number
] } & <1-10>,
where
interface-type
represents the port type,
interface-number
represents the port
number, and & <1-10> means that you can provide up to 10 port indexes/port index lists
for this argument. The start port number must be smaller than the end number and the
two ports must of the same type.
Description
Use the
display dot1x
command to display information about 802.1x, including
session information, statistics, or configuration.
With both the
sessions
keyword and the
statistics
keyword not provided, this
command displays 802.1x configuration information.
Related commands:
reset dot1x statistics
,
dot1x
,
dot1x retry
,
dot1x max-user
,
dot1x port-control
,
dot1x port-method
,
dot1x timer
.
Examples
# Display 802.1x configuration information.
<Sysname> display dot1x
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
EAD quick deploy is enabled
