Gree GMVVQ1015WM/C-X, Service Manual

Page: 78 / 433

Gree GMV6 HR DC Inverter VRF Units Service Manual
76
Icon Name Instruction
Standard floor
heating
It means the current mode is the standard floor heating mode
Schedule
Display when schedule function is enabled
Memory
Memory status (when the unit is re-energized after power failure, the indoor unit will
resume to the setting status)
Sun-flower
It is displayed when the sun-flower function is valid
High-temp
sterilization
The icon will light up when the high-temp sterilization function is valid and will be
blinking under sterilization
Auto function
The corresponding interface will display this icon when automatic floor heating water
temp. setting or automatic hot water temp. setting function is valid
Rapid heat function
The corresponding interface will display this icon when rapid floor heating or rapid
water heating function is valid
Solar
It is displayed when the hydro box is connected to solar energy; Flicker when solar
power is on work
Shield
It means the wired controller is in shielding status
Group control
It displays when a wired controller controls several hydro boxes at the same time
Slave wired
controller
It means the wired controller is the slave wired controller
Cycle
Running status of the back water pump
Anti-freeze
It displays under anti-freezing status
E-heater
It displays when the auxiliary electrical heating is on
Child lock
It means the wired controller is in child lock status
Defrost
It displays if the ODU is in defrosting status
Invalid operation
It displays when the operation is invalid
NOTE
：
When wired controller is connected with different hydro boxes, some functions will be different.