Gree GMVVQ1015WM/C-X, Service Manual

Page: 343 / 433

Gree GMV6 HR DC Inverter VRF Units Service Manual
341
Note: The outlet pipe of the
gas liquid separator must be
placed under the inlet pipe
when the liquid in the gas
liquid separator is being
drained.
No more than 20°
between the compressor
and ground
It is also necessary to use a transparent container to contain the impurities in the gas-liquid
separator, observe the color of the impurities and seal them, and return to the factory to check the
impurities.
Notes
：
If the compressor is damaged and needs to be replaced, the gas-liquid separator must be
replaced at the same time! Regardless of whether the gas-liquid separator contains impurities or
other abnormal conditions.
2
）
Remove the confirmed oil separator.
（
1
）
The four-way valve pipeline needs to be removed before removing the oil separator.
Refer to 5.1.9 for the removal method.
（
2
）
Remove the pipes connected with the four-way valve pipe and the oil separator (except
the oil return pipe).
（
3
）
Remove the oil separator as follows, pour the oil separator, use a container to collect,
and seal it for inspection.