GRASS VALLEY IQUCP25, User Manual

Page: 129 / 338

129
UCP - 3901
User Manual
Sender / Num
Audio Channels
(Multiviewer SDC
only)
Select the actual number of audio channels present on this spigot. Set
the highest number of audio channels expected to be used.
Sender / Packet
Time
(Multiviewer SDC
only)
Select the amount of time required to complete the transmission of
each audio packet.
Receiver / Audio
Delay
Move the slider to set an
Audio Delay
as required. Click to return
to the preset default value.
Receiver /
Make/Break Mode
Specifies how changes to an output’s destination will be made.
Make before Break: causes the new destination to buffer data before
connection to the previous destination is broken; this results in a
smoother transition, but requires more bandwidth.
Break before Make:
simply swaps the output’s destination without
buffering.
Select the required mode from the drop-down list.
Num Audio Flows Select the number of audio flows on this spigot to use. Options are:
• 1 flow of 16 channels
• 2 flows of 8 channels each
• 4 flows of 4 channels each
Note these flows are contiguous, so selecting
1
means Flow 1 is used,
selecting
2
means Flows 1 and 2 are used, and selecting
4
means
Flows 1 to 4 are used.
Spigot Link When inputs are linked together to support an UHD quad link output,
this shows the group of 4 output spigots used for this. See Link
Control on page 110 to enable UHD inputs.
Master X-Y:
This is a range of spigots that the above settings apply to.
Slaved to X:
This is the spigot on which the above settings come from.
Take Click to apply any changes made to the above parameters.
Parameter Description