GRASS VALLEY IQUCP25, User Manual

Page: 248 / 338

248
MADI Processing SDC
SFP Configuration
SFP Configuration
The SFP Configuration page allows various SFP parameters of the installed SFP cartridges
to be adjusted, if required.
The page panel has two sections (
SFP 1 Compatibility Control and SFP 2 Compatibility
Control ); one for each SFP cage. The configuration of the SFP 1 Compatibility Control is
the same as the
SFP 2 Compatibility Control
. Only the configuration of the
SFP 1
Compatibility Control
is shown below. To identify SFP 1 / 2, see Rear Panel and Connectors
on page 32.
Figure 7 - 34: SFP Configuration Page
The majority of SFPs will operate correctly with UCP - 3901 / IQUCP25 cards without any
need for adjustment. Some, however, may need to have card parameters set a little
differently.
If difficulties are encountered with an SFP not working as expected, proceed as follows:
1 Select the appropriate SFP type from the SFP Database List , and click Take . Verify
whether the SFP is now working correctly; if so, no further action is required.
2 If the SFP is still not working properly, select Custom from the SFP Database List . This
allows all the parameters shown to be adjusted as required. Make changes and click
Take
to apply them.
3 When a working configuration is found, the parameter values are saved by clicking
beside each field.