GRASS VALLEY IQUCP25 User Manual Download

Page: 292 / 338

292

Multiviewer SDC

Input Loss Control

Input Loss Control

The

Input Loss Control

page allows control of the card’s response to signal loss from the

internal multiviewer, spigots 1 to 4.

Figure 9 - 7:

Input Loss Control Page

Options upon signal loss are:

Spigot Pages

A separate page is provided for each of the active spigots.

•

Spigots 1 to 4

source up to 4 video IP signals. These form the multiviewer head display

(mosaic) output video IP streams.

•

Spigots 5 to 16

receive up to 12 video IP signals. These are multiviewer video inputs 1

to 12.

On the rear panel, see

12G/3G/HD/SD-SDI I/O – Serial digital video inputs / outputs (4)

, on

page 34 and

3G / HD / SD SDI I/O – Serial digital video inputs / outputs (12)

, on page 35 to

know on which HD-BNC input / output each spigot is available.

Spigot 1 to 4 (Multiviewer Head Outputs)

The

Spigot

pages 1 to 4 configure the multiviewer’s head output (mosaic) streams.

The configuration of these pages are the same as for Essence Processing, though only audio

and video essences can be configured. See

Input Spigots

, on page 122.

Spigot 5 to 16 (Multiviewer Inputs)

The

Spigot

pages 5 to 16 configure the multiviewer’s input streams.

Option

Operation

Freeze

Picture will freeze.

Black

Picture will cut to black.

TPG

Not available.

Note:

The pages shown here may differ from those seen on your particular

system, depending on the model and configuration of your UCP

3901

card.

Summary of Contents for IQUCP25



















































































































































































































































































































































Search results

Summary of Contents for IQUCP25

Reviews:

Related manuals for IQUCP25

Brands by name

Popular brands

GRASS VALLEY IQUCP25, User Manual

Search results

Summary of Contents for IQUCP25

Reviews:

Related manuals for IQUCP25

Brands by name

Popular brands