GRASS VALLEY IQUCP25, User Manual

Page: 190 / 338

190
MADI Processing SDC
Label Patterns
• For the Receiver Pattern field:
{dev} Receiver:{spig}
Where
Sender
and
Receiver
are “static” text.
Saving and Recalling Values
Field values are saved by clicking next to the appropriate field, and recalled using a
Memory or a Saveset. See the RollCall Control Panel User Manual for more information on
saving and recalling saved values.
Auto-generated Variables
The following variables are available.
Free “static” text can also be added between the variables, as shown in the Restoring Preset
Values section above. Add variables/static text as required.
The Sender Variables
/
Receiver Variables Field
Sender/Receiver Variables are optional, and allow a more descriptive label to be defined if
required. The following optional variables are available.
Variable Description
{dev} Device label. For example, Camera1 .
{spig} Spigot number (starting from {s_snum} or {r_snum}).
{flow} Flow number.
{flowalt} Flow number with alternate formatting. Restarts at 1 for each
flow format type.
{fmt} Flow format type. Uses one of {sf_v1}, {sf_v2}, {sf_v3}, {sf_a},
{sf_d}, {rf_v1}, {rf_a} or {rf_d}. See below for more information.
Variable Description
{sf_v1} Sender 2022-6 format description. Default = “Video”.
{sf_v2} Sender 2110-20 format description. Default = “VideoAlt”.
{sf_v3} Sender VC2 format description. Default = “VC2”. VC2 is
currently unsupported.
{sf_a} Sender 2110-30 format description. Default = “Audio”.
{sf_d} Sender 2110-40 format description. Default = “Data”.
{rf_v1} Receiver video format description. Default = “Video”.
{rf_a} Receiver audio format description. Default = “Audio”.
{rf_d} Receiver data format description. Default = “Data”.
{s_snum} Sender start index number. Default = 1.
{r_snum} Receiver start index number. Default = 1.