GRASS VALLEY IQUCP25, User Manual

Page: 166 / 338

166
Essence Processing SDC
Ethernet Gb
Parameter Description
Ethernet Pane The Ethernet pane displays details of the Gb network interface, and
allows a static IP address to be defined.
IP Address: When Mode is set to Static , set the card’s IP address.
Default Gateway: When Mode is set to Static , set the network switch’s
IP address.
Subnet Mask: When Mode is set to Static , set the subnet mask for
your network.
Enter information as required, then click
to save. New settings are
applied when Restart is clicked.
New Mode Set the Ethernet port’s connection mode.
DHCP:
The Ethernet port uses automatic configuration obtained from
the network's DHCP server.
Static:
You set a fixed Ethernet port configuration (
IP Address
,
Default Gateway , and Subnet Mask ).
New settings are applied when
Restart
is clicked.
Restart Click when the New Mode setting is changed for this to take effect.
Only make this change during off hours as this can take up to 30
seconds to complete.
MAC Address Shows the Ethernet port’s MAC Address.
Mode Shows the Ethernet port’s current operating mode ( DHCP or Static ).
See
New Mode
to set the operating mode.
Link Status Shows the Ethernet port’s connections status with the network
switch.
UP: Connection successful
DOWN: Connection failed