GRASS VALLEY IQUCP25, User Manual

Page: 155 / 338

155
UCP - 3901
User Manual
Where N is the input/output number .
Parameter Description
INPUT_ N _IDENT= System-defined identifier for the input, based on the rear ID.
INPUT_ N _NAME= Name of the input, as defined on the
Setup
page. See Setup on
page 163.
INPUT_ N _STATE= Valid values are:
OK : input signal good.
FAIL : input signal not detected.
INPUT_ N _TYPE= HD/SD/3G SDI
INPUT_ N _STANDARD= PAL/NTSC/625 Mono/525 Mono
INPUT_N_STEAM= Status of the spigot streaming mode: DUAL , SINGLE , A or B . See
Input Spigots on page 122 and Output Spigots on page 127.
OUTPUT_ N _IDENT= Name of the output as shown on the rear panel. See
12G/3G/HD/SD-SDI I/O – Serial digital video inputs / outputs (4)
on page 34 and 3G / HD / SD SDI I/O – Serial digital video inputs
/ outputs (12) on page 35.
OUTPUT_ N _NAME= Name of the output that you have defined.
OUTPUT_ N _STATE= Valid values are:
OK : output signal good.
FAIL : output signal not detected.
WARN:Freeze
WARN: Pattern
WARN:Black
OUTPUT_ N _TYPE= Valid values are:
SD SDI
HD SDI
HD/SD/3G SDI
OUTPUT_ N _STANDARD PAL/NTSC/625 Mono/525 Mono
OUTPUT_ N _MAKE_BREA
K
Logs how changes to an output’s destination will be made.
MBB
: Make before Break causes the new destination to buffer
data before connection to the previous destination is broken;
this results in a smoother transition, but requires more
bandwidth.
BBM: Break before Make simply swaps the output’s destination
without buffering.