GRASS VALLEY IQUCP25, User Manual

Page: 130 / 338

130
Essence Processing SDC
Output Spigots
To Set Multicast Details
1 Select the required Video Std .
2 Enter IP address and IP port number details in the ‘New settings’ column, as required.
Click
S
or press the enter key to enter each new value.
3 Select the Flow Type .
4 Click Take .
Primary and
Secondary Panes
The
Primary
IP flows pass through one network connection (usually
SFP1), while the Secondary IP flows pass through another network
connection (usually SFP2).
Status The Status panel reports the video, audio, and metadata status
information for each enabled flow.
For outputs, this shows what the
card is receiving (what is available) and not necessarily what the
card is going to process. For example, it might receive 16 audio
channels in a stream, but only process the first four when
Num
Audio Flows
is set to 4.
Mac: IP flow received over IP network.
Loopback:
IP flow received by the UCP - 3901 / IQUCP Card looped-
back from the UCP - 3901 / IQUCP Card. Loop-back can be achieved by
either explicitly setting the UCP - 3901 / IQUCP Card to receive a flow
from itself, or by using the UCP - 3901 / IQUCP Card’s loop-back router
facility. See Loopback Router on page 162.
Flow Panes for
Video, Audio and
Metadata
Displays Video, Audio, and Metadata status, and allows multicast IP
and port details to be defined for the selected spigot. IP flow settings
may be set through GV Orbit.
The
Current
column shows the present value. To manually set the
multicast details for the spigot, set the value in the New column and
click to save the details, or to return to the preset default
value.
• Enter Multicast IP and Multicast Port details as required.
• Enter the appropriate details in the Source IP and Source Port
fields. Each spigot can support a variety of flows.
• Select the required flow type (video standard) from the Flow
Type drop-down list.
• To support redundancy (SMPTE ST 2022-7), you must set the Flow
Type to 2110 for both the primary and secondary ports for the
Video, Audio, and Metadata essences and set Streaming to Dual .
To verify that redundancy is working, see Testing if Network
Redundancy (SMPTE ST 2022-7) is Working on page 327.
Parameter Description