GE HEALTHCARE Biacore T100 Handbook Download Page 69

Page: 69 / 238

Biacore T100 Software Handbook BR-1006-48 Edition AE

Application wizards 4

Click

Import

to import the sample data from an external file. Import of sample

information must be enabled in

Tools:Preferences

to use this function. See

Appendix A for details of import functions and file formats.

Click

Control Samples

to enter control samples for the run.

Specify the details of control samples and the frequency with which they should
be run. If you check only

Run control samples

, the controls will be run once only

at the start of the assay. If you check

Repeat control samples every…

, the

controls will be run at the start of the assay and then at the specified interval,
and again at the end of the assay. Use the

Cycle Run List

option in the

System

Preparations

step to verify where control samples will be run during the assay.

Step 5. System preparations

Check the

System preparations

options as required (see Section 4.2.5).

Step 6. Rack positions

Accept or change the rack positions for the various solutions required (see
Section 4.2.6).

Step 7. Prepare run protocol

Edit the

Prepare Run Protocol

text if desired (Section 4.2.7). This text will be

displayed at the start of a run when the wizard template is used. Save the wizard
template if required and start the run.

Evaluation of kinetics/affinity assays

Chapter 9 describes how to evaluate kinetics/affinity assays.

Summary of Contents for Biacore T100















































































































































































































































Search results

Summary of Contents for Biacore T100

Reviews:

Related manuals for Biacore T100

Brands by name

Popular brands

GE HEALTHCARE Biacore T100, Handbook

Search results

Summary of Contents for Biacore T100

Reviews:

Related manuals for Biacore T100

Brands by name

Popular brands