manualshive.com logo in svg

GE HEALTHCARE Biacore T100, Handbook

The GE HEALTHCARE Biacore T100 Handbook is an essential manual for users of this cutting-edge biomedical research tool. Obtain expert guidance and instructions with this free download, exclusively available at manualshive.com. Enhance your research capabilities with confidence and ease, courtesy of this comprehensive user manual.

Share
Download
background image

Biacore T100 Software Handbook BR-1006-48 Edition AE

63

Application wizards 4

The volumes of sample and mixing solution used are determined automatically 
so that the final volume of mixed solution is sufficient for the injection.

Notes:

Mixing in the autosampler is very reproducible, but high accuracy cannot 
be guaranteed. If your application requires accurate mixing proportions, 
mix the samples outside the autosampler.

The mixing function is not supported in 384-well microplates. The wells 
on these plates are too small for reliable mixing in the autosampler.

Step 4. Calibration curve

Specify the details of the calibration curve for the concentration measurement.

Check 

Repeat calibration

 and enter a number of sample cycles to repeat the 

calibration curve at intervals during the assay. The calibration curve will be run 
at the beginning of the assay and at the specified interval. Thus specifying a 
repeat every 15 sample cycles and running 35 samples will result in calibration 
curves at the beginning and after samples 15 and 30. If the 

Repeat calibration

 

box is not checked, calibration will be run once at the beginning of the assay.

Enter the concentrations for the calibration points on the curve. You must enter 
at least two concentrations for the calibration curve. (Two concentrations are 
sufficient for a linear calibration curve, but if you intend to use the 
recommended four-parameter fitting function for the calibration curve, you 
need at least four points.) To run replicate concentrations, enter the same 
concentration on multiple rows. Calibration points will be run in the order 
entered. You can choose a different concentration unit if required from the pull-
down list in the table header. 

Summary of Contents for Biacore T100















































































































































































































































Reviews:

No comments

Related manuals for Biacore T100

ACS 3200 Series Operation And Instruction Manual preview
3200 Series
Brand: ACS Pages: 56
ZOLL 330 Operator'S Manual preview
330
Brand: ZOLL Pages: 84
Kaivac 2100 Series Operator'S & Parts Manual preview
2100 Series
Brand: Kaivac Pages: 29
MacDon 1000 Operator'S & Parts Manual preview
1000
Brand: MacDon Pages: 65
YYZ Lighting LYNX Installation preview
LYNX
Brand: YYZ Lighting Pages: 3
Camp Safety COBRA Manual preview
COBRA
Brand: Camp Safety Pages: 118
Ultrafast Systems KRONOS User Manual preview
KRONOS
Brand: Ultrafast Systems Pages: 39
Mackworth HOLLY User Instructions preview
HOLLY
Brand: Mackworth Pages: 2
CAMPAGNOLA COBRA PRO Use And Maintenance Manual preview
COBRA PRO
Brand: CAMPAGNOLA Pages: 209
Cannon CT-2000 Manual preview
CT-2000
Brand: Cannon Pages: 40
NARGESA H3 Instruction Book preview
H3
Brand: NARGESA Pages: 34
Tascam HS-20 Owner'S Manual preview
HS-20
Brand: Tascam Pages: 128
ParaBody 842 User Manual preview
842
Brand: ParaBody Pages: 6
Eazyzap Y724 Instruction Manual preview
Y724
Brand: Eazyzap Pages: 32
Obdstar MS50 User Manual preview
MS50
Brand: Obdstar Pages: 42
Jeio tech Lab companion SI-300 Operating Instruction preview
Lab companion SI-300
Brand: Jeio tech Pages: 69
JDS Uniphase IP Video Test Option HST-3000 Product Manual preview
IP Video Test Option HST-3000
Brand: JDS Uniphase Pages: 4
Jct JH Series Operating Manual preview
JH Series
Brand: Jct Pages: 16

Brands by name

Popular brands

Load more brands