manualshive.com logo in svg

GE HEALTHCARE Biacore T100, Handbook

The GE HEALTHCARE Biacore T100 Handbook is an essential manual for users of this cutting-edge biomedical research tool. Obtain expert guidance and instructions with this free download, exclusively available at manualshive.com. Enhance your research capabilities with confidence and ease, courtesy of this comprehensive user manual.

Share
Download
background image

Biacore T100 Software Handbook BR-1006-48 Edition AE

167

Kinetics and affinity analysis 9

If the interaction is too fast to provide kinetic information, you may only be able 
to determine affinity constants. Interactions that do flatten out sufficiently 
during the injection or dissociate sufficiently during the dissociation phase may 
sometimes be analyzed by prolonging the association or dissociation phase 
respectively.

Residuals

You should check that the residuals (the difference between experimental and 
fitted value for each data point in the sensorgrams) lie within reasonable limits. 
For a perfect fit, the residuals reflect the short-term noise in the sensorgrams 
and scatter around zero (typically ±1-2 RU). Systematic deviations, seen as a 
definite shape in the residual plot, indicate that the interaction model is to a 
greater or lesser extent unsuitable for the interaction. As an aid in judging the 
residuals, guidelines are drawn on the residual plot to indicate the range of 
acceptability. Most of the residuals should be within the inner (green) limits.

Figure 9-3. 

The residuals for a good fit (left) scatter around 0, ideally in a random 

distribution representing the noise in the sensorgrams. For a poor fit (right) the residual 
curves show a definite shape and deviate farther from 0.

The guideline positions are calculated in relation to the response range of the 
sensorgrams. The guidelines are only shown for evaluations using the 
predefined 1:1 model (i.e. when the quality control tab is included).

IMPORTANT! 

Use the 

Quality Control 

assessment as a help in making your 

own judgement of the results. Pass status in the quality control parameters 
does not necessarily indicate that the fit is acceptable or that the results are 
biologically relevant. On the other hand, Fail status in any of the parameters 
is a reliable warning indicator.

Base your assessment on the overall quality of the results and the fitting, 
taking all quality control parameters into account.

Summary of Contents for Biacore T100















































































































































































































































Reviews:

No comments

Related manuals for Biacore T100

Panasonic WJHD309 - DIGITAL DISK RECORDER Conversion Manualline preview
WJHD309 - DIGITAL DISK RECORDER
Brand: Panasonic Pages: 7
Panasonic WJ-ND300 Administrator Console Network Setup Manual preview
WJ-ND300 Administrator Console
Brand: Panasonic Pages: 24
Panasonic AJSPD850P - P2 DECK Operating Instructions Manual preview
AJSPD850P - P2 DECK
Brand: Panasonic Pages: 73
Keiser M SERIES Manual preview
M SERIES
Brand: Keiser Pages: 82
Keiser M SERIES Calibration Instruction preview
M SERIES
Brand: Keiser Pages: 4
Panlux MODENA Instructions preview
MODENA
Brand: Panlux Pages: 2
Daktronics HS-200 Owner'S Manual preview
HS-200
Brand: Daktronics Pages: 30
DAKOTA ULTRASONICS PR-82 Operation Manual preview
PR-82
Brand: DAKOTA ULTRASONICS Pages: 28
Jackco 852 User Manual preview
852
Brand: Jackco Pages: 6
Olsen Sprint Quick Operation Manual preview
Sprint
Brand: Olsen Pages: 4
Fakir HYPO CLEAN Fast User Manual preview
HYPO CLEAN
Brand: Fakir Pages: 22
Ofa Bamberg memory Instructions For Use Manual preview
memory
Brand: Ofa Bamberg Pages: 80
Qlight SK Quick Start Manual preview
SK
Brand: Qlight Pages: 4
Quantum ELM Replacement Instructions Manual preview
ELM
Brand: Quantum Pages: 11
Quanser QNET User Manual preview
QNET
Brand: Quanser Pages: 21
Quanser 3 DOF Laboratory Manual preview
3 DOF
Brand: Quanser Pages: 18
Gaspardo M Use And Maintenance / Spare Parts preview
M
Brand: Gaspardo Pages: 88
VaBroom VB-LIG1-01 Quick Start Manual preview
VB-LIG1-01
Brand: VaBroom Pages: 4

Brands by name

Popular brands

Load more brands