manualshive.com logo in svg

GE HEALTHCARE Biacore T100, Handbook

The GE HEALTHCARE Biacore T100 Handbook is an essential manual for users of this cutting-edge biomedical research tool. Obtain expert guidance and instructions with this free download, exclusively available at manualshive.com. Enhance your research capabilities with confidence and ease, courtesy of this comprehensive user manual.

Share
Download
background image

Biacore T100 Software Handbook BR-1006-48 Edition AE

145

Concentration analysis 8

provided that the report point used for the calibration curve exists in the cycles 
from the kinetic run, calculated concentrations will be reported for these 
samples.

In order to ensure that concentration analysis is correctly evaluated in 
combined result sets, make sure that all files that contribute to the combined 
result set are derived from concentration analysis runs. Provided that each file 
starts with a calibration curve that is not excluded from the evaluation, the 
results will be calculated within the respective files even in the combined result 
set. However, if calibration curves at the beginning of files are missing or 
excluded, there will be overlap between the individual file sets and some 
samples from one file will be evaluated on the basis of calibration curves from 
another file. In such cases, it is important to ensure that the calibration curves 
and sample analyses in the different files refer to the same analyte and are 
performed under as far as possible identical condition.

8.3

Evaluating calibration-free measurements

Calibration-free concentration analysis calculates the analyte concentration 
from the measured mass transport properties and values for the diffusion 
coefficient and molecular weight, provided as evaluation variables when the 
assay is run (Section B.2). The evaluation is based on fitting the sensorgram data 
to a model of 1:1 interaction kinetics, with mass transport parameters 
calculated from the supplied diffusion coefficient and molecular weight, and 
with the analyte concentration set as a globally fitted variable.

To evaluate calibration-free concentration analysis, choose 

Concentration 

Analysis:Calibration-free 

from the evaluation toolbar, or choose 

Add 

Concentration Analysis:Calibration-free

 

from the 

Evaluation

 menu. 

Summary of Contents for Biacore T100















































































































































































































































Reviews:

No comments

Related manuals for Biacore T100

Makerfire N10 Instructions Manual preview
N10
Brand: Makerfire Pages: 10
Raymarine A series Installation And Operation Instructions Manual preview
A series
Brand: Raymarine Pages: 464
3M 701 Operator'S Manual preview
701
Brand: 3M Pages: 8
ZOLL M Series Service Manuallines preview
M Series
Brand: ZOLL Pages: 3
KaVo K4 Operating Instructions Manual preview
K4
Brand: KaVo Pages: 13
vc999 K3 Operating Instruction preview
K3
Brand: vc999 Pages: 52
1010music Toolbox Quick Start Manual preview
Toolbox
Brand: 1010music Pages: 2
1010music Blackbox Quick Start Manual preview
Blackbox
Brand: 1010music Pages: 4
Facnor LS Installation Manual preview
LS
Brand: Facnor Pages: 33
QBC Diagnostics Star Operators & Service Manual preview
Star
Brand: QBC Diagnostics Pages: 65
XanLite EXPERT Quick Start Manual preview
EXPERT
Brand: XanLite Pages: 4
SAMCHULLY HCH Instruction Manual preview
HCH
Brand: SAMCHULLY Pages: 48
HAGER WERKEN SPEEDO-CLEAN Instructions For Use preview
SPEEDO-CLEAN
Brand: HAGER WERKEN Pages: 2
ValueStore US V16 Quick Manual preview
V16
Brand: ValueStore US Pages: 2
Xtool KC501 Manual preview
KC501
Brand: Xtool Pages: 8
Nady Audio MP-FE2 Owner'S Manual preview
MP-FE2
Brand: Nady Audio Pages: 2
popular Little i-PEN Manual preview
Little i-PEN
Brand: popular Pages: 27
Ushio MIDORI ULB-50sc Operating Manual preview
MIDORI ULB-50sc
Brand: Ushio Pages: 24

Brands by name

Popular brands

Load more brands