GE HEALTHCARE Biacore T100 Handbook Download Page 23

Page: 23 / 238

Biacore T100 Software Handbook BR-1006-48 Edition AE

Control Software – general features 2

Report point table

The right-click menu options for the report point table correspond to the

Edit:Report Points

menu options.

Notebook

Right-click menu options in the notebook represent standard Windows editing
functions.

2.4

File storage

2.4.1

Wizard templates and methods

Wizard templates are saved in files with a file name extension

.bw**

, where

represents an abbreviation that identifies the wizard (e.g. a wizard template for
concentration analysis has the extension

.bwConc

Methods are saved in files with the file name extension

.Method

Note:

The extension will not be displayed if the default setting

Hide file

extensions for known file types

is selected in the Windows Explorer

folder options. Turning this setting off can help you to identify file types in
dialog boxes.

Templates and methods may be saved in any location. A folder structure under
the default location as specified in

Tools:Preferences

is however recommended,

since files in this location are handled preferentially in the

Open/New

dialog

boxes for wizards and templates (see Section 4.1.1).

Click on the browse button to change the folder setting.

2.4.2

Result files

Results are saved in files with the file name extension

.blr

. Result files from

wizard- or method-based runs contain a copy of the wizard template or method
as well as the results of the run.

Summary of Contents for Biacore T100















































































































































































































































Search results

Summary of Contents for Biacore T100

Reviews:

Related manuals for Biacore T100

Brands by name

Popular brands

GE HEALTHCARE Biacore T100, Handbook

Search results

Summary of Contents for Biacore T100

Reviews:

Related manuals for Biacore T100

Brands by name

Popular brands