51
3.3Troubleshooting by Error Message
DX100 Service Manual
3.3.2 Information/Warning/Error
Table 3-2. Information
Error
ID
Name
Message
Cause (Status)
Remedy
I-1311
Trimmed Waste Paper Box full
Check the Trimmed Waste Paper Box.
Empty the box if it is full.
Trimmed Waste Paper Box Usage became full.
Remove the scraps from the Trimmed Waste Paper
Box.
I-2101
Ink Tube life near end (Notice)
It is nearly time to replace parts.
• Ink Supply Tube
Contact a technical representative.
You cannot print if parts have reached the end of their service life.
The replacement time of Ink Tube is near.
1. Replace the Ink Tube with a new one.
2. Reset the counter of the Ink Tube.
I-2102
Decompression Pump Unit life near
end (Notice)
It is nearly time to replace parts.
• Ink Supply Decompression Pump
Contact a technical representative.
You cannot print if parts have reached the end of their service life.
The replacement time of Decompression Pump
Unit.
1. Replace the Decompression Pump Unit.
2. Reset the counter of the I Decompression Pump
Unit.
I-2103
Passage Pump maintenance near end
(caution)
It is nearly time to replace parts.
• Ink Supply Pump
Contact a technical representative.
You cannot print if parts have reached the end of their service life.
The replacement time of Ink Passage Pump Unit.
1. Replace the Ink Cartridge Holder.
2. Reset the counter of the Ink Cartridge Holder.
I-2104
Suction Pump maintenance near end
(warning)
It is nearly time to replace parts.
• Ink Suction Pump
Contact a technical representative.
You cannot print if parts have reached the end of their service life.
The replacement time of Ink Suction Pump Unit.
1. Replace the Capping Unit.
2. Reset the counter of the Capping Unit.
I-2201
Ink low
Ink Low
(X*)
Prepare a new Ink Cartridge.
You may continue printing until replacement of the Ink Cartridge
is required.
The replacement time of the corresponding color’ s
Ink Cartridge is approaching.
Check the remaining ink level on the “Printer
Status” screen of the Service Program
.
I-2307
AID out of guaranteed temperature error Cannot perform [Detect Clogging] correctly.
Room temperature may not be within the guaranteed operating
range.
Check the room temperature.
The temperature of the room where the printer is
installed is out of the guaranteed range.
If the room temperature is within the guaranteed
range, delete all the print jobs and perform
Diagnostic Cleaning with the maintenance tool.
I-2401
Maintenance Cartridge near end
Replace the Maintenance Cartridge soon
Prepare a new Maintenance Cartridge.
You may continue printing until replacement of the Maintenance
Cartridge is required.
The replacement time of Maintenance Cartridge is
approaching.
Check the remaining maintenance Cartridge level
on the “Printer Status” screen of the Service
Program.
I-5201
Job size limit warning (SDK)
Amount of data in print jobs sent to printer nearly at maximum
limit.
Stop sending the current print job and send the remaining pages as
another print job.
The amount of data of the print jobs being sent to
the printer has nearly reached the maximum limit.
Delete all the print jobs once and send them in parts.
Summary of Contents for Frontier-S DX100
