FujiFilm Frontier-S DX100, Service Manual

Page: 269 / 303

269
5.5Paper Feed Related Adjustment
DX100 Service Manual
5.5.6 Cut position Adjustment
1. Select 1. Adjust / Maintenance

Adjustment

Cut Position Adjustment .
2. Click [Print] to print the adjustment pattern ( Figure 5-93 ). (See Figure 5-92 )
3. Measure the width of the gap between the cut edge of paper and the printed base
line at the three points (right, left, and center) with a steel scale. (See
Figure 5-93 )
4. Enter the three measured values into the three boxes respectively, and click
[Input] .
5. Repeat Step 2 and check that all the measured values are inside 5 mm +/- 0.3 mm.
Figure 5-92. Cut position Adjustment screen
Figure 5-93. Cut position Adjustment adjustment pattern
Cutting
edge
Point 2 Point 1 Point 2
Standard
line
Paper feed direct
ion
Full side
Home side