FujiFilm Frontier-S DX100, Service Manual

Page: 160 / 303

160
4.5Disassembly and Assembly Procedure
DX100 Service Manual
18. Remove the EJ grounding spring.
Figure 4-110. Removing the Lower Platen Unit (2)
19. Release the tab of the two left bushes and remove the bushes by rotating it in the
direction of arrow.
Figure 4-111. Removing the Lower Platen Unit (3)
20. Remove the two E-rings, and remove the two washers and two disc springs from the
front EJ roller and rear EJ roller.
21. Disengage the tabs of the two right bushes.
Figure 4-112. Removing the Lower Platen Unit (4)
EJ grounding spring
Left bushes
Tab
Tab
When installing the washer and disc spring, install them in the order
shown below.
Washer Disc spring E-ring
Front EJ roller
Rear EJ roller
E-ring,
washer,
disc spring
Right bushes
Tabs