FujiFilm Frontier-S DX100, Service Manual

Page: 254 / 303

254
5.4Carriage Related Adjustment
DX100 Service Manual

For the i1iSis
1. Confirm that the M/C No. displayed on the main screen and the M/C No. written
on the correction charts are the same.
Figure 5-67. M/C No.
2. Make sure the color measurement device is connected with the PC and its power is
on.
3. Click [Measure Calib Chart] . (See Figure 5-46 )
4. When the confirmation screen appears, click [Yes] .
Figure 5-68. Confirmation screen
5. When the screen is displayed, check that the light on the right of the color
measurement device is flashing green, and then insert the correction chart that
matches the color chart ID and preset ID displayed on the screen into the color
measurement device. (When inserting the correction chart, align it to the left.)
Figure 5-69. Color calibration screen
Figure 5-70. Color measurement device
M/C No.
M/C No.
Correction chart
Color measurement device
Lamp