FujiFilm Frontier-S DX100, Service Manual

Page: 195 / 303

195
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.9 Motor
4.5.9.1 PF Motor
1. Remove the Top Cover. (P.97)
2. Remove the Upper Cover. (P.100)
3. Remove the Rear Frame. (P.101)
4. Remove the Left Frame. (P.102)
5. Remove the PF Timing Belt.
(
"4.5.5.17 SMAP Roller" Step15 (p156) )
6. Disconnect the cable of the PF Motor from the Relay connector.
7. Cut the cable tie, release the PF Motor cable.
8. Remove the FFC from the reinforcement plate.
9. Disconnect the cable of the APG Motor from the relay connector.
10. Release the cable from the wire saddle.
11. Remove the two screws, and remove the reinforcement plate.
A) Silver M3x6 Bind machine screw : two pieces
Figure 4-161. Removing the Reinforcement plate
12. Remove the two screws, and remove the PF Motor.
B) Silver M3x4 machine screw : two pieces
Figure 4-162. Removing the PF Motor
FFC
A
Reinforcement plate
Double-sided tape
Wire saddle
A
Relay connector
Cable of the APG Motor
Cable tie
Relay connector
Cable
A D J U S T M E N T
R E Q U I R E D
Carry out the adjustments referring to "5.1.2 Adjustment Items and the
Order by Repaired Part" (p210) when the PF Motor is removed or
replaced.
B
B
PF Motor