FujiFilm Frontier-S DX100, Service Manual

Page: 143 / 303

143
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.5.8 Feed Roller (1/2)/Inlet Roller
4.5.5.8.1 Feed Roller 1
1. Removing the Trimmed Waste Paper Box. (P.98)
2. Removing the Roll Unit. (P.130)
3. Removing the Paper Width Guide Unit. (P.139)
4. Open the Upper Roll Guide B.
5. Remove the cut washer, and remove the gear.
6. Release the tab of the bush and remove the bush by rotating it in the direction of arrow.
Figure 4-84. Removing the gear
7. Remove the Cut washer, and remove the handle.
Figure 4-85. Removing the handle
8. Remove the parallel pin.
9. Remove the E-ring, remove the washer, disc spring and plastic washer.
Bushing
Tab
Feed Roller 1
Upper Roll Guide B
Gear
Cut washer
When installing the washer, disc spring, and plastic washer, install them in
the order shown below.
Handle
Cut washer
Plastic washer Disc spring Washer E-ring