FujiFilm Frontier-S DX100, Service Manual

Page: 147 / 303

147
4.5Disassembly and Assembly Procedure
DX100 Service Manual
Figure 4-92. Removing the gear
5. Release the tab of the bush and remove the bush by rotating it in the direction of arrow.
6. Remove the grounding spring.
Figure 4-93. Removing the bush/Grounding Spring
7. Open the Upper Roll Guide A.
8. Release both ends of the Inlet Roller from the holes on the right and left of the frame.
9. Remove the E-ring and the plastic washer from the Inlet Roller.
Figure 4-94. Removing the Inlet Roller
E-ring
Gear
Washer,
disc spring,
plastic washer
Bush
Tab
Grounding Spring
Lubrication Lubrication
Lubricate the parts referring to " 6.3 Lubrication (p280) " when the Inlet
Roller is replaced.
E-ring,
plastic washer
Inlet Roller
Hole
Hole
Upper Roll
Guide A