FujiFilm Frontier-S DX100, Service Manual

Page: 141 / 303

141
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.5.7.2 Driven Roller 1
1. Remove the Trimmed Waste Paper Box. (P.98)
2. Remove the Roll Unit. (P.130)
3. Remove the three screws, and remove the frame.
A) Silver M3x8 P-tite screw: three pieces
Figure 4-79. Removing the frame
4. Remove the two torsion springs.
Figure 4-80. Removing the torsion spring
5. Release both ends of the Driven Roller 1 from the holes on the right and left of the
frame.
Figure 4-81. Removing the Driven Roller 1
A
A
A
Frame
Lubrication Lubrication
Lubricate the parts referring to " 6.3 Lubrication (p280) " when the Driven
Roller 1 is replaced.
Torsion Spring
Torsion Spring
Driven Roller 1
Hole
Hole