FujiFilm Frontier-S DX100, Service Manual

Page: 145 / 303

145
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.5.8.2 Feed Roller 2
1. Remove the Trimmed Waste Paper Box. (P.98)
2. Remove the Roll Unit. (P.130)
3. Remove the Upper Roll Guide B. (P.138)
4. Open the A Upper Roll Guide A.
5. Remove the cut washer, and remove the gear.
6. Release the tab of the bush and remove the bush by rotating it in the direction of arrow.
Figure 4-88. Removing the gear
7. Remove the E-ring, remove the washer, disc spring and plastic washer.
8. Release the tab of the bush and remove the bush by rotating it in the direction of arrow.
Figure 4-89. Removing the bush
Bush
Tab
Feed Roller 2
Gear
Washer
When installing the washer, disc spring, and plastic washer, install them in
the order shown below.
Plastic washer Disc spring Washer E-ring
E-ring
Washer,
disc spring,
plastic washer
Bush
Tab