FujiFilm Frontier-S DX100, Service Manual

Page: 4 / 303


Precautions on power supply
W A R N I N G
Before disassembling or assembling the machine, turn the
power off and disconnect the power cable.
Use 230 VAC as the supply voltage.
Otherwise, a fire or electric shock may result.
Use the accompanying power cable only. Do not use it for
any other devices.
Otherwise, a fire or electric shock may result.
Do not insert or remove the power plug with wet hands.
Otherwise, an electric shock may result.
W A R N I N G
Make sure to insert the power plug completely.
Otherwise, a fire or electric shock may result.
Do not plug multiple power cables into a single outlet.
Otherwise, a fire may result.
Make sure to perform grounding work to prevent
accidental short circuit.
Otherwise, a fire or electric shock may result. Perform
grounding work with either of the followings:
• Plug socket with protective earth contact
• Grounding adapter
When using a grounding adapter, always connect a ground
wire.
When turning on the machine with its cover removed for
operation check, be careful not to touch the current-
carrying parts or hot parts.
Check the power cable of the machine; deformation of the
plug or damage on the surface. If any problem is found,
replace it with a cable of the same model as that attached
to the machine first.
Check that an antivirus software is installed in the
computer used for service support. Keep virus pattern files
updated to the latest version.