FujiFilm Frontier-S DX100, Service Manual

Page: 64 / 303

64
3.4Troubleshooting by Error code
DX100 Service Manual
152A Roll motor
overload error The electric current flowing when driving the motor is irregularly
large.
• Motor cable failure
• Irregular load
• Encoder failure
• Motor failure
1. Check the connection between the Roll motor and Main Board
(CN116, CN206).

Take away the foreign objects.

Error reoccurs
• Replace the Main Board with a new
one. (P. 107)
• Replace the Roll motor with a new
one. (P. 198)
152B Roll motor
over speed error Detects that it is being driven at an irregularly faster speed than the
specified value just before stopping.
• Irregular load
• Encoder failure
• Motor driver failure
---

Take away the foreign objects.

Error reoccurs
• Replace the Main Board with a new
one. (P. 107)
• Replace the Roll motor with a new
one. (P. 198)
152C Roll motor
reversing error Detects accumulatively more than the specified number of times that
it is being driven in the opposite direction to the specified driving
direction.
• The polarity of Roll motor cable is opposite.
• Encoder failure
1. Check the connection between the Roll motor and Main Board
(CN116, CN206).

Take away the foreign objects.

Error reoccurs
• Replace the Main Board with a new
one. (P. 107)
• Replace the Roll motor with a new
one. (P. 198)
152D Roll motor
driving time-out error Detects that the driving period is irregularly long.
• Irregular load
• The firmware has a defect.
---

Take away the foreign objects.

Error reoccurs
• Replace the Main Board with a new
one. (P. 107)
• Replace the Roll motor with a new
one. (P. 198)
152E Roll motor
velocity deviation error Detects, when accelerating/decelerating the motor, that it is being
driven at an irregularly faster speed than the specified value.
• Irregular load
• Encoder failure
• Motor failure
• Motor driver failure
---

Take away the foreign objects.

Error reoccurs
• Replace the Main Board with a new
one. (P. 107)
• Replace the Roll motor with a new
one. (P. 198)
152F Roll motor
lock error 1. Connection failure of the Roll motor.
2. Detects that it is being driven at an irregularly slower speed than
the specified value.
• Irregular load
• Encoder failure
• Motor failure
1. Check the connection between the Roll motor and Main Board
(CN116, CN206).

Take away the foreign objects.

Error reoccurs
• Replace the Main Board with a new
one. (P. 107)
• Replace the Roll motor with a new
one. (P. 198)
Table 3-5. Troubleshooting by Error Code
Code Error Name Cause Check Item Remedy